Aluminium Items

Post any work that you need doing - printing, cutting, engraving, 3D prototyping, milling etc.
Post Reply
jimc
Member
Posts: 4
Joined: Mon Mar 10, 2014 5:21 pm

Aluminium Items

Post by jimc » Mon Mar 10, 2014 6:03 pm

We need various items cut out of 0.5 mm thick aluminium. About 3 0r 4 different dia circles up to 55mm dia. Also small arch shapes.
We would supply the aluminium as it is coated for sublimation.
These items would be on regular basis.

Jim

User avatar
sawdust
Gold Member
Posts: 422
Joined: Tue Oct 11, 2011 8:39 pm
Location: Ashby de la Zouch Leicestershire
Contact:

Re: Aluminium Items

Post by sawdust » Tue Mar 11, 2014 6:44 pm

Sounds like you need someone with a laser cutter. May need some work like this also, so keeping my eye on this post :shock:
DTG and Versacamm SP540i user

jimc
Member
Posts: 4
Joined: Mon Mar 10, 2014 5:21 pm

Re: Aluminium Items

Post by jimc » Tue Mar 11, 2014 7:43 pm

sawdust wrote:Sounds like you need someone with a laser cutter. May need some work like this also, so keeping my eye on this post :shock:
Tried that, had about 40 cut out of a sheet and not a single one was useable.

Jim

legin
Member
Posts: 13
Joined: Wed Oct 05, 2011 5:22 pm
Location: Carmarthenshire (engravingshop@hotmail.com)

Re: Aluminium Items

Post by legin » Wed Mar 12, 2014 10:06 am

I have some aluminium sheet in stock. will give it a go for you and will let you know how the aluminium has cut (In the past I have had no problem in cutting shapes and sizes of aluminium & brass up to 550 x 350 x 3mm).

Many thanks.....legin

legin
Member
Posts: 13
Joined: Wed Oct 05, 2011 5:22 pm
Location: Carmarthenshire (engravingshop@hotmail.com)

Re: Aluminium Items

Post by legin » Wed Mar 12, 2014 12:49 pm

Hi Jim,

Just come back from the workshop after cutting some assorted shapes out of brass finish aluminium trophy plate .5mm thick. No problem! If you require our services, just get in touch.

Many thanks.....legin

jimc
Member
Posts: 4
Joined: Mon Mar 10, 2014 5:21 pm

Re: Aluminium Items

Post by jimc » Wed Mar 12, 2014 4:51 pm

legin wrote:Hi Jim,

Just come back from the workshop after cutting some assorted shapes out of brass finish aluminium trophy plate .5mm thick. No problem! If you require our services, just get in touch.

Many thanks.....legin
Thanks, will be in touch shortly
Jim

GUY DESILVA
Member
Posts: 18
Joined: Fri Mar 24, 2017 3:51 pm

Re: Aluminium Items

Post by GUY DESILVA » Fri Mar 24, 2017 5:32 pm

we do these jobs on regular basis. let us know if you still need. we can cut any shape you need from almost any material. San Signs & Awnings.

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests