Printing on a Book

General chat on substrates, materials and inks
Post Reply
User avatar
emreserim
Bronze Member
Posts: 58
Joined: Thu Dec 08, 2016 3:51 pm
Location: Turkey
Contact:

Printing on a Book

Post by emreserim » Thu Mar 09, 2017 1:53 pm

Hi again,

Here's my problem; i have to print on this item but whatever i try is not working.

Any ideas?
Attachments
01.jpg
02.jpg
03.jpg
Rock and Roll
LEF-20 User Based in Turkey

PhillyDee
Silver Member
Posts: 121
Joined: Fri Jun 03, 2016 10:45 pm
Location: South Shields, UK
Contact:

Re: Printing on a Book

Post by PhillyDee » Thu Mar 09, 2017 2:33 pm

Its a bit too high even for the distance mode (maximum 5mm). Can the catch be taken iff and re-attached?
Roland BN-20 (CMYKWh)
Roland Versa UV LEF-20 (CMYKGlWh)
HPC Laser - LS6840PRO 60W Laser cutter/engraver
HPC Laser - LS1290PRO 80W Laser cutter/engraver
HPC Laser - LS1290PRO 150W Laser cutter/engraver
Trotec Speedy 300 120W with JC Camera system and rotary axis.

User avatar
emreserim
Bronze Member
Posts: 58
Joined: Thu Dec 08, 2016 3:51 pm
Location: Turkey
Contact:

Re: Printing on a Book

Post by emreserim » Fri Mar 10, 2017 10:12 am

unf. it's not taken off. :( it goes away in distance mode. it looks ok but not in quality.
Rock and Roll
LEF-20 User Based in Turkey

Vasiis
Member
Posts: 4
Joined: Sat Dec 10, 2016 11:05 am

Re: Printing on a Book

Post by Vasiis » Sat Mar 11, 2017 9:10 pm

if it will take the heat (use some wax paper to protect) you can try a transfer as in a T shirt.

User avatar
emreserim
Bronze Member
Posts: 58
Joined: Thu Dec 08, 2016 3:51 pm
Location: Turkey
Contact:

Re: Printing on a Book

Post by emreserim » Thu Mar 30, 2017 3:02 pm

Vasiis wrote:
Sat Mar 11, 2017 9:10 pm
if it will take the heat (use some wax paper to protect) you can try a transfer as in a T shirt.
no idea what you said
Rock and Roll
LEF-20 User Based in Turkey

User avatar
Kai Perry
Moderator
Posts: 2178
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: Printing on a Book

Post by Kai Perry » Fri Mar 31, 2017 3:16 pm

You could try printing on a transfer material and then pressing it to the item instead of printing direct.
Kai Perry
RolandCare Advisor
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest