nozzle problem

Come in and introduce yourself
Post Reply
kushtrimbucaj
Member
Posts: 6
Joined: Tue Jan 17, 2017 3:02 pm

nozzle problem

Post by kushtrimbucaj » Tue Jan 17, 2017 3:10 pm

Hello,
I am Kushtrim, I have a problem with my Xf640 . when I a do a print test the nozzels are not in line. Here is o Pic
Attachments
IMG_20170117_145911.jpg
IMG_20170117_145935.jpg

User avatar
Kai Perry
Moderator
Posts: 2082
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: nozzle problem

Post by Kai Perry » Tue Jan 17, 2017 6:17 pm

It looks like there has been a head strike, which ink type are you running?

Start with a manual clean and look for anything attached to the head.
Kai Perry
RolandCare Advisor
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

kushtrimbucaj
Member
Posts: 6
Joined: Tue Jan 17, 2017 3:02 pm

Re: nozzle problem

Post by kushtrimbucaj » Thu Jan 19, 2017 11:36 am

thanks,
I tried all the cleanin but same again. i am using RXV ink from Triangle

User avatar
Kai Perry
Moderator
Posts: 2082
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: nozzle problem

Post by Kai Perry » Thu Jan 19, 2017 2:47 pm

Potentially it may need the head replacing if the cleans aren't making any difference, have you replaced wipers recently?
Kai Perry
RolandCare Advisor
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

User avatar
mrtn
Gold Member
Posts: 2081
Joined: Tue Feb 14, 2012 4:37 pm
Location: Tallinn, Estonia

Re: nozzle problem

Post by mrtn » Thu Jan 19, 2017 2:52 pm

This head is FUBAR.
Triangle is not really a good ink anyway, so before a new head in - swap the ink.

kushtrimbucaj
Member
Posts: 6
Joined: Tue Jan 17, 2017 3:02 pm

Re: nozzle problem

Post by kushtrimbucaj » Fri Jan 20, 2017 2:58 pm

Kai Perry wrote:Potentially it may need the head replacing if the cleans aren't making any difference, have you replaced wipers recently?
hi,
yes I did replaced wipers a month ago but i will replace again.

thanks

kushtrimbucaj
Member
Posts: 6
Joined: Tue Jan 17, 2017 3:02 pm

Re: nozzle problem

Post by kushtrimbucaj » Fri Jan 20, 2017 2:59 pm

mrtn wrote:This head is FUBAR.
Triangle is not really a good ink anyway, so before a new head in - swap the ink.
hi,
i dont understan FUBAR, What does it mean

Thanks

User avatar
mrtn
Gold Member
Posts: 2081
Joined: Tue Feb 14, 2012 4:37 pm
Location: Tallinn, Estonia

Re: nozzle problem

Post by mrtn » Fri Jan 20, 2017 4:16 pm

kushtrimbucaj wrote:
mrtn wrote: i dont understan FUBAR, What does it mean
Oh, https://en.wikipedia.org/wiki/List_of_m ... erms#FUBAR

kushtrimbucaj
Member
Posts: 6
Joined: Tue Jan 17, 2017 3:02 pm

Re: nozzle problem

Post by kushtrimbucaj » Mon Jan 23, 2017 1:18 pm

mrtn wrote:
kushtrimbucaj wrote:
mrtn wrote: i dont understan FUBAR, What does it mean
Oh, https://en.wikipedia.org/wiki/List_of_m ... erms#FUBAR

hahah

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests