EGX 600 Reset HELP

Come in and introduce yourself
Post Reply
Alikatguitars
Member
Posts: 4
Joined: Fri Apr 14, 2017 3:07 am

EGX 600 Reset HELP

Post by Alikatguitars » Fri Apr 14, 2017 3:17 am

Hi.
PLEASE can someone put me out of my misery.
I have bought an EGX600. I have Worked out how to do basics on it... however.. it came down a bit hard into some brass, it tried to engrave then an emergency stop warning cut the machine off.. i managed to do it a second time.. now evwrything moves.. X Y Z ..etc.. but the spindle will not fire up.. there are no warnings.. the belt has not slipped.. the machine has only done 49 hours.. the spring is tight and the auto Z is off.. so all basic stuff tried..
Apparently it can be reset somehow.. the nose cone was and is off.

User avatar
Kai Perry
Moderator
Posts: 2123
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: EGX 600 Reset HELP

Post by Kai Perry » Tue Apr 18, 2017 11:43 am

You can perform a user initialise by pressing the Enter Key whilst turning on the power.
Kai Perry
RolandCare Advisor
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

Alikatguitars
Member
Posts: 4
Joined: Fri Apr 14, 2017 3:07 am

Re: EGX 600 Reset HELP

Post by Alikatguitars » Wed May 03, 2017 4:27 am

Will try that..
Thinking it might have over worked and blown the spindle motor?

Alikatguitars
Member
Posts: 4
Joined: Fri Apr 14, 2017 3:07 am

Re: EGX 600 Reset HELP

Post by Alikatguitars » Wed May 17, 2017 12:25 pm

So.. was advised it could of been an overloaded motor of the circuit board .. spent a fortune on a new motor.. and it ain't that ! Everything works and moves.. except the motor won't start up.. doin my head in...
Where do I get the circuit board.. and how much.. and is that the tge only other thing it could be ?

Alikatguitars
Member
Posts: 4
Joined: Fri Apr 14, 2017 3:07 am

Re: EGX 600 Reset HELP

Post by Alikatguitars » Wed May 24, 2017 8:34 am

right..over it..
replaced brand new motor, brand new circuit board.. and still motor wont start !!!
surely someone can help !!

User avatar
Kai Perry
Moderator
Posts: 2123
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: EGX 600 Reset HELP

Post by Kai Perry » Tue May 30, 2017 11:46 am

Which board did you replace?
Kai Perry
RolandCare Advisor
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest