LEF-20 Emboss!

Show off your creations
bloobird0
Member
Posts: 3
Joined: Wed Aug 22, 2012 4:29 pm

Re: LEF-20 Emboss!

Post by bloobird0 » Thu Apr 03, 2014 3:08 pm

Hello Joe,
how high is the final print ?

User avatar
Joe Wigzell
Gold Member
Posts: 731
Joined: Thu Apr 05, 2012 9:07 am
Location: Clevedon, North Somerset
Contact:

Re: LEF-20 Emboss!

Post by Joe Wigzell » Thu Apr 03, 2014 4:05 pm

Hiya,

It's a bit hard to measure accurately as it's in the middle of the plaque thing it's printed on, but around 6-7mm I think.
Joe Wigzell
Academy and Creative Centre Manager
Roland DG UK Ltd
http://www.rolanddg.co.uk

bloobird0
Member
Posts: 3
Joined: Wed Aug 22, 2012 4:29 pm

Re: LEF-20 Emboss!

Post by bloobird0 » Tue Apr 08, 2014 12:06 pm

:shock:

how does the printhead height is adjusted? Is it raised after each layer?

User avatar
Joe Wigzell
Gold Member
Posts: 731
Joined: Thu Apr 05, 2012 9:07 am
Location: Clevedon, North Somerset
Contact:

Re: LEF-20 Emboss!

Post by Joe Wigzell » Tue Apr 08, 2014 12:40 pm

The machine will not auto adjust, however I only needed to adjust the height after every other 10-layer step to keep the height accuracy.
Joe Wigzell
Academy and Creative Centre Manager
Roland DG UK Ltd
http://www.rolanddg.co.uk

Ernest
Member
Posts: 1
Joined: Fri Apr 25, 2014 9:34 pm

Re: LEF-20 Emboss!

Post by Ernest » Fri Apr 25, 2014 9:45 pm

Hi there!
Can you tell me about the thick of the one layer?
I think that for example: If I need exactly 0.3 mm thickness, how many layers will I need?

User avatar
Joe Wigzell
Gold Member
Posts: 731
Joined: Thu Apr 05, 2012 9:07 am
Location: Clevedon, North Somerset
Contact:

Re: LEF-20 Emboss!

Post by Joe Wigzell » Mon Apr 28, 2014 11:55 am

Hi Ernest,
I am not 100% sure, will have to run some tests. The gloss/clear will have a slightly different thickness to the CMYK I think. I am not in the office for a few weeks so will have to wait unless somebody else knows the answer?
Joe Wigzell
Academy and Creative Centre Manager
Roland DG UK Ltd
http://www.rolanddg.co.uk

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest