Bubble Free Etch Film

Post questions, share ideas and techniques related to window graphics, window display and point-of-sale
Post Reply
EricT
Member
Posts: 30
Joined: Tue Aug 09, 2011 12:05 pm
Location: Northampton

Bubble Free Etch Film

Post by EricT » Fri Feb 10, 2012 4:46 pm

Anyone got any good advice on the best way to apply the above? Should it be wet or dry and any tips? We are going to use the METAScape Frost as the bloke down the road says it is good stuff!

Advice welcome.

User avatar
Rob Goleniowski
Moderator
Posts: 409
Joined: Wed Aug 03, 2011 9:26 am
Location: Clevedon
Contact:

Re: Bubble Free Etch Film

Post by Rob Goleniowski » Tue Feb 28, 2012 9:42 pm

Hi Eric

From what I can gather, one of the most important tips is to use one of the hard plastic squeegees rather than the felt ones, as you don't get the necessary pressure with the felt.

Other than that, I'd say prep the glass properly and use a good de-greaser/window cleaner so you don't end up with patches and see what the material supplier says for other tips.

Good luck!

Rob
Rob Goleniowski
UK & Ireland Sales Manager
Roland DG (UK) Ltd
email: rgoleniowski@rolanddg.com
http://www.rolanddg.co.uk
Follow me: @goleniowski

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests