Search found 5 matches

by owen305
Wed Sep 14, 2016 6:15 am
Forum: 3D Prototyping & Milling
Topic: MDX 40 problem
Replies: 9
Views: 2256

Re: MDX 40 problem

Now I'm confusing what is the reason that any code I put in, the work spindle will move to the same location and stop.
by owen305
Wed Sep 14, 2016 5:40 am
Forum: 3D Prototyping & Milling
Topic: MDX 40 problem
Replies: 9
Views: 2256

Re: MDX 40 problem

It is MDX-40 I think.Since it is owned by the university, I'm not sure if it is upgraded by someone else.

The VPanel is shown in attachment without a 'cut' button. I use the print function of the notepad to send the code to the machine.
Will it work the same as you told me?
by owen305
Mon Sep 12, 2016 1:56 am
Forum: 3D Prototyping & Milling
Topic: MDX 40 problem
Replies: 9
Views: 2256

Re: MDX 40 problem

Thanks for your advice. I've tried it several minutes ago. I watched carefully and found:
The value on Vpanel shows that the machine does not run as 'test code' is.
So I think the machine is not setup correctly.
If I only use code to control the machine, only the driver should be installed, isn't it?
by owen305
Fri Sep 09, 2016 1:50 pm
Forum: 3D Prototyping & Milling
Topic: MDX 40 problem
Replies: 9
Views: 2256

Re: MDX 40 problem

It is MDX40. It is only used to work on a plane to produce some grooves. The following italic code is the one 'works' and bold code is one of codes I wrote. Today I have found, even I've changed the coordinate on Vpanel, it will follow the same path, so now I'm not sure it really works. ;;^IN;!MC0; ...
by owen305
Fri Sep 09, 2016 2:03 am
Forum: 3D Prototyping & Milling
Topic: MDX 40 problem
Replies: 9
Views: 2256

MDX 40 problem

Hello. I'm not sure what happen to my program or the machine. I only installed the driver for MDX and try to program it with notepad. I was given a sample program and while I was testing it, it works normally; but when I make a program by myself (even I modified the sample by deleting some lines of ...