Page 1 of 1

Sp300v cutting

Posted: Fri Nov 17, 2017 8:57 pm
by Baggsy
Hi all any one able to tell me how to re calibrate the cutter as it seams to be cutting about 3mm out

Cheers
Rich

Re: Sp300v cutting

Posted: Fri Nov 17, 2017 9:46 pm
by mrtn
MENU > CUTTING MENU > PRINT-CUT ADJ.

Re: Sp300v cutting

Posted: Fri Nov 17, 2017 10:58 pm
by Baggsy
You make it all sound so easy 👍
I’ll have a go in the morning

Re: Sp300v cutting

Posted: Sat Nov 18, 2017 12:17 am
by mrtn
It may just be the easiest thing to do :)

Values on screen:
F - feed, the media movement direction.
S - scan, the carriage movement direction.

Use arrow keys to modify.

Cut line adjustment in feed direction: increase F fo move cut line towards yourself and vice versa.
Cut line adjustment in scan direction: increase S fo move cut line to the key panel/screen direction and vice versa.

Re: Sp300v cutting

Posted: Sun Nov 19, 2017 8:58 pm
by Baggsy
Thanks I will have a go 👍

Re: Sp300v cutting

Posted: Thu Nov 30, 2017 6:04 pm
by Baggsy
Cheers sorted that now I’ve got lines running in it cleaned it they went then came back on the next Job any ideas

Re: Sp300v cutting

Posted: Thu Nov 30, 2017 7:07 pm
by mrtn
What?