mpx 90 does not work

Post questions, share ideas and techniques relating to engraving and impact imaging
Post Reply
hoovergh
Member
Posts: 10
Joined: Sat Mar 31, 2018 5:36 am

mpx 90 does not work

Post by hoovergh » Sat Aug 01, 2020 4:03 am

the printer does not work
light turns on and off
anyone know what to do?

User avatar
Kai Perry
Moderator
Posts: 3379
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: mpx 90 does not work

Post by Kai Perry » Mon Aug 03, 2020 12:23 pm

Is the light flashing? If so check the user manual for possible causes.

If just purchased ensure you have removed all the retainers.
Kai Perry
Application Engineer
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

hoovergh
Member
Posts: 10
Joined: Sat Mar 31, 2018 5:36 am

Re: mpx 90 does not work

Post by hoovergh » Tue Aug 04, 2020 1:57 am

Light blinks, please reinstall software
and nothing
the machine is 90 mpx
Any recommendation ?????

User avatar
Kai Perry
Moderator
Posts: 3379
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: mpx 90 does not work

Post by Kai Perry » Tue Aug 04, 2020 4:54 pm

Have you removed the reaining screw as well as the blue retainers?
Kai Perry
Application Engineer
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

hoovergh
Member
Posts: 10
Joined: Sat Mar 31, 2018 5:36 am

Re: mpx 90 does not work

Post by hoovergh » Thu Aug 06, 2020 1:54 am

yes ... my machine was working fine
... now I turn it on and the light flashing

hoovergh
Member
Posts: 10
Joined: Sat Mar 31, 2018 5:36 am

Re: mpx 90 does not work

Post by hoovergh » Thu Aug 06, 2020 2:28 am


User avatar
Kai Perry
Moderator
Posts: 3379
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: mpx 90 does not work

Post by Kai Perry » Thu Aug 06, 2020 10:03 am

What happens if you press the power button, does the head move?

Also can yo test with a different USB and ensure no extensions or hubs are being used.
Kai Perry
Application Engineer
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest