One of our recent users sent in this photo of his adaptor he fitted to connect up to his dust extraction system.
Thanks Ben Mundy - Plymouth.
Purchased from Axminster who also supply the range of Numatic Vacuums like these pro range one (www.numatic.co.uk).
Note using a simple Henry or other household type vacuum continuously has the possibility of catching fire and is not recommended.
Dust Extraction on MDX-540
- Patrick Thorn
- Gold Member
- Posts: 289
- Joined: Thu Aug 11, 2011 9:19 am
- Location: Staines
- Contact:
Dust Extraction on MDX-540
Last edited by Patrick Thorn on Thu Mar 23, 2017 5:49 pm, edited 1 time in total.
- Patrick Thorn
- Gold Member
- Posts: 289
- Joined: Thu Aug 11, 2011 9:19 am
- Location: Staines
- Contact:
Re: Dust Extraction on MDX-540
This is another idea we have seen users making a bracket to connect their extractor hose.
They used the screw holes that hold the cover on, but needed longer screws to accommodate the thickness of their bracket.
Note, you can use smaller flexible hose and make sure there is plenty of free hose back to your extractor unit.
Please do not connect any extraction to the "ventilation hose" shown in Yellow.
Some users have made an array with several 3/4 inch Loc Line flexible hoses. This information is just suggestions.
They used the screw holes that hold the cover on, but needed longer screws to accommodate the thickness of their bracket.
Note, you can use smaller flexible hose and make sure there is plenty of free hose back to your extractor unit.
Please do not connect any extraction to the "ventilation hose" shown in Yellow.
Some users have made an array with several 3/4 inch Loc Line flexible hoses. This information is just suggestions.
Who is online
Users browsing this forum: No registered users and 1 guest