Page 1 of 1

Dust Extraction on MDX-540

Posted: Wed Aug 21, 2013 10:22 am
by Patrick Thorn
One of our recent users sent in this photo of his adaptor he fitted to connect up to his dust extraction system.
Thanks Ben Mundy - Plymouth.
Axminster Bendi-Hoze.jpg
Bendi Hoze
Purchased from Axminster who also supply the range of Numatic Vacuums like these pro range one (

Note using a simple Henry or other household type vacuum continuously has the possibility of catching fire and is not recommended.

Re: Dust Extraction on MDX-540

Posted: Thu Mar 23, 2017 5:45 pm
by Patrick Thorn
This is another idea we have seen users making a bracket to connect their extractor hose.
They used the screw holes that hold the cover on, but needed longer screws to accommodate the thickness of their bracket.
Note, you can use smaller flexible hose and make sure there is plenty of free hose back to your extractor unit.
MDX-540 Extraction mount idea.jpg
Please do not connect any extraction to the "ventilation hose" shown in Yellow.

Some users have made an array with several 3/4 inch Loc Line flexible hoses.
Screen Shot 2017-03-23 at 16.41.21.png
Screen Shot 2017-03-23 at 16.41.21.png (68.29 KiB) Viewed 940 times
This information is just suggestions.