MDX-40A + ZCL-40A

Post questions, share ideas and techniques relating to 3D prototyping and milling
Post Reply
Dnalor
Member
Posts: 1
Joined: Thu May 14, 2015 10:32 am

MDX-40A + ZCL-40A

Post by Dnalor » Thu May 14, 2015 11:15 am

Hi,

After importing different models to SPR, the minimum workpiece looks to
be ~107mm, even with the material limitation disabled in preferences.

Is this true? I'm wanting to cut very small parts from a 60x40x12 billet.

Ro

User avatar
Andrew Dudley
Gold Member
Posts: 438
Joined: Tue Jul 26, 2011 10:04 am
Location: Clevedon - England
Contact:

Re: MDX-40A + ZCL-40A

Post by Andrew Dudley » Thu May 14, 2015 11:45 am

Hi Ro,

In SRP Player, when using the Rotary axis you have by default settings to make sure you do not collide with the clamp vice and tailstocks on either end of your billet of material.
We obviously recommend to keep these safeguards on, however if you are familiure with the machine, and are confident you know what you are doing you can turn these off.

An example of the limit initially.
Limitations.png
And now with the limitations turned off.
Limitations off.png
You can do this under the preferences section in SRP Player.

So you can cut from a small block, however you do have to take into account that the MDX-40A has to cut the billet and not the clamp, so you will always need a little bit more material to hold in the clamp and tailstock if used.

Hope this helps?
Andrew Dudley
Business Manager - 3D & Dental
Roland DG (UK) Ltd
Web: www.rolanddg.co.uk

User avatar
Patrick Thorn
Gold Member
Posts: 305
Joined: Thu Aug 11, 2011 9:19 am
Location: Staines
Contact:

Re: MDX-40A + ZCL-40A

Post by Patrick Thorn » Wed May 27, 2015 10:11 pm

Just a point to note.
MDX-40A can use ZCL-40 or ZCL-40A.
Make sure you select ZCL-40A, as ZCL-40 is a much smaller rotary axis.
Patrick Thorn
Premier Consultant - 3D Technology
Roland DG UK Ltd

http://www.rolanddg.co.uk

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest