EGX400/TS400

Come in and introduce yourself
Post Reply
NIGEL F1
Member
Posts: 1
Joined: Thu Mar 14, 2019 1:14 pm

EGX400/TS400

Post by NIGEL F1 » Thu Mar 14, 2019 2:34 pm

Hi, Looking for advice about TS400 which I understand is really an EGX400 with slight differences.We currently run an EGX for volume production of repeat jobs and using Dr Engrave.I want to increase productivity and have got the chance of purchasing a Techsoft at a good price but I need to confirm that I can just load jobs direct from Dr Engrave by selecting EGX400 in print setup.
I realise that there is no auto Z sensing but this machine would only be dedicated to 1.6mm material to with some ngineering i could spring load the head which is not a big problem to me.
Does it perform as fast as the EGX and are there any other constrainints that I should be aware of.
Is there a link for a TS400 operator manual that may give me some guidance about these machines?

Look forward to any input.!!

Many thanks

User avatar
Kai Perry
Moderator
Posts: 2896
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: EGX400/TS400

Post by Kai Perry » Thu Mar 14, 2019 4:08 pm

You can obtain a user manual from the RolandCare team on 01275 335540. Driver wise you would need to select the TS-400, it will work with XP.
Kai Perry
Application Engineer
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests