Firmware updates

Post Reply
PhillyDee
Silver Member
Posts: 210
Joined: Fri Jun 03, 2016 10:45 pm
Location: South Shields, UK
Contact:

Firmware updates

Post by PhillyDee » Fri Aug 09, 2019 5:50 pm

Is there anywhere that has a repository of firmware updates and info about those firmware updates? My lef20 is on 2.6, but ive found a 3.2 from roland... but no documentation as to changes etc or even if it is actually the newest firmware.
Roland BN-20 (CMYKWh)
Roland Versa UV LEF-20 (CMYK Pr Wh)
HPC Laser - LS1290PRO 80W Laser cutter/engraver x4
HPC Laser - LS6090PRO 80W Laser cutter/engraver x2
Trotec Speedy 300 120W with JC Vision Camera system and rotary axis.
30W Galvo Fiber Laser Engraver

User avatar
Kai Perry
Moderator
Posts: 3027
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: Firmware updates

Post by Kai Perry » Mon Aug 12, 2019 9:53 am

If you use the OnSupport application to monitor the machine, it will inform you of updates to firmare and give you an explaination. The latest version for the LEF-20 is 3.20, it was released back in May.
Kai Perry
Application Engineer
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

PhillyDee
Silver Member
Posts: 210
Joined: Fri Jun 03, 2016 10:45 pm
Location: South Shields, UK
Contact:

Re: Firmware updates

Post by PhillyDee » Mon Aug 12, 2019 5:50 pm

Thanks Kai, never knew about that lol :D
Roland BN-20 (CMYKWh)
Roland Versa UV LEF-20 (CMYK Pr Wh)
HPC Laser - LS1290PRO 80W Laser cutter/engraver x4
HPC Laser - LS6090PRO 80W Laser cutter/engraver x2
Trotec Speedy 300 120W with JC Vision Camera system and rotary axis.
30W Galvo Fiber Laser Engraver

User avatar
Kai Perry
Moderator
Posts: 3027
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: Firmware updates

Post by Kai Perry » Tue Aug 13, 2019 9:13 am

You can download the latest installer for OnSupport from - http://download.rolanddg.jp/en/color.html#onsupport

OnSupport can also send emails when it has started or finished a job,has an error or when ink is low.
Kai Perry
Application Engineer
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

PhillyDee
Silver Member
Posts: 210
Joined: Fri Jun 03, 2016 10:45 pm
Location: South Shields, UK
Contact:

Re: Firmware updates

Post by PhillyDee » Tue Aug 13, 2019 10:36 am

Yup, already up and running with it :)

It was probably in the manuals I never read when I got my machine haha
Roland BN-20 (CMYKWh)
Roland Versa UV LEF-20 (CMYK Pr Wh)
HPC Laser - LS1290PRO 80W Laser cutter/engraver x4
HPC Laser - LS6090PRO 80W Laser cutter/engraver x2
Trotec Speedy 300 120W with JC Vision Camera system and rotary axis.
30W Galvo Fiber Laser Engraver

User avatar
Kai Perry
Moderator
Posts: 3027
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: Firmware updates

Post by Kai Perry » Tue Aug 13, 2019 10:43 am

If you set the emails working just remember to set your phone to silent when you go to bed and are still running the machine, especially if you are running multiple jobs.
Kai Perry
Application Engineer
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

PhillyDee
Silver Member
Posts: 210
Joined: Fri Jun 03, 2016 10:45 pm
Location: South Shields, UK
Contact:

Re: Firmware updates

Post by PhillyDee » Tue Aug 13, 2019 11:17 am

Kai Perry wrote:
Tue Aug 13, 2019 10:43 am
If you set the emails working just remember to set your phone to silent when you go to bed and are still running the machine, especially if you are running multiple jobs.
Haha, good tip :D. Luckily I turned off ALL notifications on my phone anyway, as I get messages day and night.
Roland BN-20 (CMYKWh)
Roland Versa UV LEF-20 (CMYK Pr Wh)
HPC Laser - LS1290PRO 80W Laser cutter/engraver x4
HPC Laser - LS6090PRO 80W Laser cutter/engraver x2
Trotec Speedy 300 120W with JC Vision Camera system and rotary axis.
30W Galvo Fiber Laser Engraver

Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests