Cyan mist on print area. BN-20

Need advice on using your Roland Hardware.
Please note we do not give engineering advice in this group
Post Reply
rayn04
Member
Posts: 3
Joined: Tue Jul 09, 2019 9:28 am

Cyan mist on print area. BN-20

Post by rayn04 » Wed Jul 10, 2019 7:56 am

Hi guys, this week while im printing i notice some cyan mist color on my printed area. I did several manual cleaning but still it's there. Ill post some picture for references. Thank you.
66449915_2440837032843392_1821463499583258624_n.jpg
66449915_2440837032843392_1821463499583258624_n.jpg
lastly i post also the nozzle condition. eventhough i did several manual cleaning, the black nozzle still in not good condition.
66726689_2184263585198833_2501529226822287360_n.jpg
Thankyou.
Attachments
66606316_2422162264730578_2895804540240527360_n.jpg

User avatar
Kai Perry
Moderator
Posts: 2968
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: Cyan mist on print area. BN-20

Post by Kai Perry » Wed Jul 10, 2019 9:06 am

The nozzle test shows a lot of missing or deflected nozzles on the black channels, this is likely causing the misting when printing, start with manual cleans and then a couple of medium/normal cleans to see if it improves the output, failing that contact your local Roland office to get an engineer to visit.
Kai Perry
Application Engineer
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

rayn04
Member
Posts: 3
Joined: Tue Jul 09, 2019 9:28 am

Re: Cyan mist on print area. BN-20

Post by rayn04 » Thu Jul 11, 2019 8:01 am

Thank you sir, will update you soon. By the way, did you how much is the cost of bn 20 today?

User avatar
Kai Perry
Moderator
Posts: 2968
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: Cyan mist on print area. BN-20

Post by Kai Perry » Thu Jul 11, 2019 9:11 am

Here are the details of the BN-20 - https://www.rolanddg.co.uk/products/pri ... ter-cutter
Kai Perry
Application Engineer
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

rayn04
Member
Posts: 3
Joined: Tue Jul 09, 2019 9:28 am

Re: Cyan mist on print area. BN-20

Post by rayn04 » Thu Jul 11, 2019 9:36 am

I did medium cleaning, normal cleaning, then medium cleaning, normal cleaning. I've done manual cleaning yesterday. Here's the result.
1.jpg
Some improvement has seen on the printed sample, but still has some mist. Hoping it will gone by repeating the cleaning process..
2.jpg

User avatar
Kai Perry
Moderator
Posts: 2968
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: Cyan mist on print area. BN-20

Post by Kai Perry » Fri Jul 12, 2019 3:35 pm

How is looking now after the second batch of cleans?
Kai Perry
Application Engineer
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest