Versa Camm not printing colour...

Need advice on using your Roland Hardware.
Please note we do not give engineering advice in this group
Post Reply
Harry182
Member
Posts: 9
Joined: Fri Jan 19, 2018 8:52 am

Versa Camm not printing colour...

Post by Harry182 » Fri Jan 19, 2018 8:58 am

ahhhh help me please.

We have a Roland Versa cam 540i and it's not printing colour...

We had some longer runs of printing last night on to sign vinyl.

it started printing lovely. We then sent some big runs of green and yellow and noticed the yellow dropping out...

We cancled the print to check the ink levels...I don't know if it's played a part but I just removed the ink cartridges to give them a shake... the printer was idle so wasn't drawing / circulating ink.

Did the first low clean (forgot the name) and then sent a nozzle test... all the colours were fine except there was a large chunk of yellow missing.. did a powerful clean and got the same results...

I then did a manual clean and noticed lots of yellow gunk in the area that would match where it was missing in the nozzle check...

I know it's advised to not touch the print head but we got a cleaning stick with a bit of Roland's cleaning solution and gently wiped it off (done this before with no problems)

Finished the manual clean and ran a nozzle test... it was blank apart from a few lines of black... did another powerful clean and it was the same...

I've tried circulating the ink and renewing the ink 3 times but nothing's coming through..

I don't know if it's worth noting that nothing's going through in to the waste bottle....

I've also tryed sending a print with just separate lines of cmyk but only a few lines of black print...

Any idea what's happened or where I should be looking?

Thanks for any help in advance :)

PhillyDee
Silver Member
Posts: 151
Joined: Fri Jun 03, 2016 10:45 pm
Location: South Shields, UK
Contact:

Re: Versa Camm not printing colour...

Post by PhillyDee » Fri Jan 19, 2018 9:53 am

No doubt someone will ask when the captops were last changed
Roland BN-20 (CMYKWh)
Roland Versa UV LEF-20 (CMYK Pr Wh)
HPC Laser - LS6840PRO 60W Laser cutter/engraver
HPC Laser - LS1290PRO 80W Laser cutter/engraver x3
HPC Laser - LS6090PRO 80W Laser cutter/engraver
Trotec Speedy 300 120W with JC Vision Camera system and rotary axis.

User avatar
mrtn
Gold Member
Posts: 2552
Joined: Tue Feb 14, 2012 4:37 pm
Location: Tallinn, Estonia

Re: Versa Camm not printing colour...

Post by mrtn » Fri Jan 19, 2018 3:46 pm

PhillyDee wrote:
Fri Jan 19, 2018 9:53 am
No doubt someone will ask when the captops were last changed
I think I just did in the clone thread. Is that bad?
Roland Dealer since 1993
facebook
instagram

Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests