Versacamm SP 300

Need advice on using your Roland Hardware.
Please note we do not give engineering advice in this group
Post Reply
Inkyfi
Member
Posts: 1
Joined: Mon Sep 23, 2019 5:14 am

Versacamm SP 300

Post by Inkyfi » Mon Sep 23, 2019 5:22 am

Hi :) the computer linked to my trusty versacamm sp 300 died and I'm having trouble getting it connected to anything else. I did ring roland and was told they dont do drivers for it anymore although if I can get my hands on an old windows 8 laptop I might be able to get it up and running. Any advice on what I need to do would be much appreciated. Thanks Fiona

User avatar
Kai Perry
Moderator
Posts: 3427
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: Versacamm SP 300

Post by Kai Perry » Mon Sep 23, 2019 10:07 am

The last supported operating system was Windows XP, you can download the driver and the installer for ColoRP from here - http://download.rolanddg.jp/en/color.html#sp300
Kai Perry
Application Engineer
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

User avatar
Geoffhogarth
Bronze Member
Posts: 68
Joined: Sat Sep 29, 2018 8:53 pm
Contact:

Re: Versacamm SP 300

Post by Geoffhogarth » Tue Oct 01, 2019 2:01 pm

I have run my SP-300V on Win XP, 7, 8 and 10 without any issues.
Used original drivers for XP, 7 and 8, no driver needed on Win 10.
Installed VW 5.xxx from scratch on Win 10, when asked if printer should be installed, answered yes.
Last edited by Geoffhogarth on Thu Oct 03, 2019 5:12 pm, edited 1 time in total.

User avatar
Kai Perry
Moderator
Posts: 3427
Joined: Wed Aug 03, 2011 3:59 pm
Location: Clevedon
Contact:

Re: Versacamm SP 300

Post by Kai Perry » Thu Oct 03, 2019 4:53 pm

It really depends on which machine you have, whether it's an SP-300 or an SP-300V.

If the SP-300, then it will only work with ColoRIP and is only supported on Windows XP.

If the SP-300V then it will work with VersaWorks.
Kai Perry
Application Engineer
Roland DG (UK) Ltd
http://www.rolanddg.co.uk

User avatar
Geoffhogarth
Bronze Member
Posts: 68
Joined: Sat Sep 29, 2018 8:53 pm
Contact:

Re: Versacamm SP 300

Post by Geoffhogarth » Thu Oct 03, 2019 5:13 pm

Kai Perry wrote:
Thu Oct 03, 2019 4:53 pm
It really depends on which machine you have, whether it's an SP-300 or an SP-300V.

If the SP-300, then it will only work with ColoRIP and is only supported on Windows XP.

If the SP-300V then it will work with VersaWorks.
I should have said SP-300V in my last reply, just updated it :-)

Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest